EXHAUST(H4DO) > Rear Exhaust Pipe
REMOVAL
CAUTION:
Vehicle components are extremely hot after driving. Be wary of receiving burns from heated parts.
1. Turn the ignition switch to OFF.
2. Lift up the vehicle.
3. Remove the bolts, springs, and nuts securing the center exhaust pipe to the rear exhaust pipe.
4. Remove the bolts and self-locking nuts securing the mufflers to the rear exhaust pipes.
CAUTION:
Be careful not to drop the rear exhaust pipe.
5. Apply a coat of spray type lubricant to the mating area of cushion rubber.
6. Remove the rear exhaust pipe from the cushion rubber.
CAUTION:
Be careful not to let the muffler contact the rear bumper.
Key lock cylinders Replacement
SECURITY AND LOCKS > Key Lock CylindersREPLACEMENT1. STEERING LOCK1. Disconnect the ground cable from battery. NOTE">2. Remove the cover assembly - column.(1) Remove the screws by turning the steering wheel to right and left.(2) Release the claw, and remove the cover assembly - column UP ...
Open/close
To open:
First unlock the rear gate lock then push
the rear gate opener button.
To close:
Lower the rear gate slowly and push down firmly until the latch engages.
The rear gate can be lowered easily if you
pull it down holding the recessed grip.
WARNING
To prevent dangerous exhaust
...
Dtc c2513 torque sensor much tolerance
POWER ASSISTED SYSTEM (POWER STEERING) (DIAGNOSTICS) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)DTC C2513 TORQUE SENSOR MUCH TOLERANCENOTE:Refer to “DTC C2511 TORQUE SENSOR MAIN” for diagnostic procedure. Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC ...