Subaru Crosstrek manuals

Subaru Crosstrek Service Manual: Removal

EXHAUST(H4DO) > Center Exhaust Pipe

REMOVAL

CAUTION:

Vehicle components are extremely hot after driving. Be wary of receiving burns from heated parts.

1. Turn the ignition switch to OFF.

2. Lift up the vehicle.

3. Remove the bolts, springs, and nuts securing the rear exhaust pipe to the center exhaust pipe.

4. Remove the bolt which holds center exhaust pipe to hanger bracket.

5. Remove the center exhaust pipe from the front exhaust pipe.

6. Remove the center exhaust pipe upper cover from the center exhaust pipe.

Inspection
EXHAUST(H4DO) > Center Exhaust PipeINSPECTION1. Check the connections and welded parts for exhaust leaks.2. Make sure there are no holes or rusting. ...

Installation
EXHAUST(H4DO) > Center Exhaust PipeINSTALLATION1. Install the center exhaust pipe upper cover to the center exhaust pipe.Tightening torque:13 N·m (1.3 kgf-m, 9.6 ft-lb)2. Temporarily tighten ...

Other materials:

Installation
COOLING(H4DO) > Radiator Main Fan and Fan MotorINSTALLATIONInstall in the reverse order of removal.CAUTION:Confirm that the radiator hose is securely connected.NOTE:If the installation of the radiator main fan and fan motor is difficult, attempt installation after loosening the bolts which hold t ...

Inspection
WIPER AND WASHER SYSTEMS > Wiper BladeINSPECTION1. Check and clean the rubber assembly - wiper.CAUTION:• Do not use organic solvent-based cleaner when cleaning rubber parts in order to avoid rubber part deterioration.• Clean rubber parts using a soft cloth or paper towel dampened with ...

Installation
CONTINUOUSLY VARIABLE TRANSMISSION(TR580) > Torque Converter AssemblyINSTALLATION1. Install the O-ring to the input shaft.NOTE:• Use new O-rings.• Apply CVTF to the O-ring.2. While holding the torque converter assembly by hand, carefully install it into the torque converter case.NOTE: ...

© 2016-2024 Copyright www.sucross.com