Subaru Crosstrek Service Manual: Removal
ENTERTAINMENT > Rear Accessory Power Supply Socket
REMOVAL
1. Disconnect the ground cable from battery and wait for at least 60 seconds before starting work. NOTE">
2. Remove the console box assembly. Console Box > REMOVAL">
3. Remove the socket assembly.
(1) While releasing the claw inside, press it in from the rear to remove the socket assembly.
(2) Remove the cap - socket.
Wiring diagram
ENTERTAINMENT > Rear Accessory Power Supply SocketWIRING DIAGRAMRefer to “Rear Accessory Power Supply Socket System” in the wiring diagram. Rear Accessory Power Supply Socket System &g ...
Rear speaker
...
Other materials:
Disassembly
CONTINUOUSLY VARIABLE TRANSMISSION(TR580) > Reduction Driven GearDISASSEMBLY1. Flatten the tab of the lock nut.2. Using the ST, counter the rotation of the reduction driven gear assembly, and remove the lock nut.ST1 18355AA000PULLEY WRENCHST2 18334AA000PIN SETST3 499987003SOCKET WRENCH ( ...
Vehicle capacity weight
Vehicle placard
The load capacity of your vehicle is
determined by weight, not by available
cargo space. The maximum load you can
carry in your vehicle is shown on the
vehicle placard attached to the driver's
side door pillar. It includes the total weight
of the driver and all passeng ...
Dtc b1827 short in side airbag lh (to ground)
AIRBAG SYSTEM (DIAGNOSTICS) > Diagnostic Chart with Trouble CodeDTC B1827 SHORT IN SIDE AIRBAG LH (TO GROUND)Diagnosis start condition:Ignition voltage is 10 V to 16 V.DTC detecting condition:• Side airbag harness (LH) circuit is shorted to ground.• Side airbag module (LH) is faulty.& ...
