Subaru Crosstrek Service Manual: Removal
EMISSION CONTROL (AUX. EMISSION CONTROL DEVICES)(H4DO) > EGR Pipe
REMOVAL
1. Disconnect the ground cable from battery.
2. Remove the clip (A), and loosen the clamps (B) and (C) securing the air intake boot.
3. Remove the air intake boot from the air cleaner case (rear) and throttle body, and move the air intake boot aside so that it does not interfere with the work.
4. Disconnect the connector from the throttle body.
5. Remove the bolts which secure the throttle body to the intake manifold, and tilt the throttle body to the rear side of vehicle.
6. Remove the bolts and nuts that hold the EGR pipe to the intake manifold and the water pipe assembly, and remove the EGR pipe.
Inspection
EMISSION CONTROL (AUX. EMISSION CONTROL DEVICES)(H4DO) > EGR PipeINSPECTIONCheck that the EGR pipe has no deformation, cracks or other damages. ...
Installation
EMISSION CONTROL (AUX. EMISSION CONTROL DEVICES)(H4DO) > EGR PipeINSTALLATION1. Temporarily install the EGR pipe to the intake manifold and water pipe assembly, and tighten the EGR pipe in numerica ...
Other materials:
Disposal
FRONT SUSPENSION > Front StrutDISPOSALCAUTION:• Before handling the strut damper and shock absorber, be sure to wear goggles to protect eyes from gas, oil and cutting powder.• Do not disassemble the strut damper and shock absorber or place them into a fire.• When discarding gas ...
Removal
SECURITY AND LOCKS > Rear Gate Opener ButtonREMOVALNOTE:• The button - opener rear gate is integrated with the rear lock button. (Model with keyless access with push button start)• Open the panel - rear gate before disconnecting the ground terminal from the battery.1. Disconnect the g ...
Removal
COOLING(H4DO) > Radiator Sub Fan and Fan MotorREMOVAL1. Disconnect the ground cable from battery. NOTE">2. Remove the air intake duct. Air Intake Duct > REMOVAL">3. Disconnect the connector from the sub fan motor assembly.4. Remove the bolts which hold the radiator sub fan sh ...
