Subaru Crosstrek manuals

Subaru Crosstrek Service Manual: Removal

COOLING(H4DO) > Radiator Sub Fan and Fan Motor

REMOVAL

1. Disconnect the ground cable from battery. NOTE">

2. Remove the air intake duct. Air Intake Duct > REMOVAL">

3. Disconnect the connector from the sub fan motor assembly.

4. Remove the bolts which hold the radiator sub fan shroud onto the radiator.

5. Remove the radiator sub fan and fan motor from vehicle.

Assembly
COOLING(H4DO) > Radiator Sub Fan and Fan MotorASSEMBLYAssemble in the reverse order of disassembly.Tightening torque:4.41 N·m (0.45 kgf-m, 3.25 ft-lb)Tightening torque:3.4 N·m (0.3 kg ...

Disassembly
COOLING(H4DO) > Radiator Sub Fan and Fan MotorDISASSEMBLY1. Remove the clip which holds the sub fan motor connector onto the radiator sub fan shroud.2. Disconnect the radiator sub fan from the sub ...

Other materials:

Adjustment
SECURITY AND LOCKS > Impact SensorADJUSTMENT1. CHECK IMPACT SENSOR1. Pull out the key from the ignition switch, or turn the ignition switch to OFF.2. Close all the windows.3. Close all the doors and rear gate. Leave open the front hood.4. Press the LOCK button of the keyless transmitter or access ...

Service diagnostics mode Operation
ENTERTAINMENT > Service Diagnostics ModeOPERATIONNOTE:Installed only to model with 7 inch display.1. PROCEDURE TO SWITCH TO SERVICE DIAGNOSTICS MODE1. Turn the ignition switch to ACC.2. After turning the ignition switch to ACC and wait for 20 seconds or more, press the button (b) five times with ...

Dtc p0327 knock/combustion vibration sensor 1 circuit low bank 1 or single sensor
ENGINE (DIAGNOSTICS)(H4DO) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)DTC P0327 KNOCK/COMBUSTION VIBRATION SENSOR 1 CIRCUIT LOW BANK 1 OR SINGLE SENSORDTC DETECTING CONDITION:Immediately at fault recognitionTROUBLE SYMPTOM:• Poor driving performance• Knocking occursCAUTI ...

© 2016-2022 Copyright www.sucross.com