Subaru Crosstrek Service Manual: Removal

1. Disconnect the ground cable from battery. NOTE">

NOTE:

For model with battery sensor, disconnect the ground terminal from battery sensor.

2. Remove the instrument panel lower cover. Instrument Panel Lower Cover > REMOVAL">

3. Move the lock lever in the arrow direction while pressing the lock button, and disconnect the connector.

4. Remove the TCM.

5. Remove the TCM from the bracket.

Installation

Transmission harness

Other materials:

Time lag test Inspection
CONTINUOUSLY VARIABLE TRANSMISSION(TR580) > Time Lag TestINSPECTIONNOTE:When the select lever is shifted while the engine is idling, there will be a certain time elapse or lag before shock is felt. This symptom helps to check the condition of forward clutch and reverse brake.• Perform the t ...

Installation
CONTINUOUSLY VARIABLE TRANSMISSION(TR580) > Secondary Pressure SensorINSTALLATIONCAUTION:• Be sure to prevent water or oil from contacting the connector terminal of secondary pressure sensor. If adhesion occurs, replace with a new part.• After installing the secondary pressure sensor, ...

Check engine warning light/Malfunction indicator light
CAUTION If the CHECK ENGINE light illuminates while you are driving, have your vehicle checked/repaired by your SUBARU dealer as soon as possible. Continued vehicle operation without having the emission control system checked and repaired as necessary could cause serious damage, which may n ...