Subaru Crosstrek Service Manual: Removal
CONTINUOUSLY VARIABLE TRANSMISSION(TR580) > Air Breather Hose
REMOVAL
1. FRONT DIFFERENTIAL SIDE
1. Remove the clip (A) from the air intake boot.
2. Loosen the clamp (B) connecting the air intake boot and air cleaner case (rear).
3. Loosen the clamp (C) which connects the air intake boot and throttle body.
4. Remove the air intake boot from the throttle body, and move it to the left side wheel apron.
5. Remove the air breather hose.
2. TRANSMISSION CASE SIDE
1. Remove the transmission assembly. Automatic Transmission Assembly > REMOVAL">
2. Remove the transmission case cover.
3. Remove the air breather hose.
4. Remove the air breather cap.
Inspection
CONTINUOUSLY VARIABLE TRANSMISSION(TR580) > Air Breather HoseINSPECTIONCheck the hose for peeling, crack or clogging. ...
Installation
CONTINUOUSLY VARIABLE TRANSMISSION(TR580) > Air Breather HoseINSTALLATION1. FRONT DIFFERENTIAL SIDEInstall in the reverse order of removal.NOTE:Securely insert the air breather hose until the hose ...
Other materials:
Service mode (models without "keyless access with push-button start system")
In service mode, the remote engine start
function is temporarily disabled to prevent
the system from unexpectedly starting the
engine while being serviced.
To engage or disengage service mode:
1. Enter the vehicle and close all vehicle
doors and the rear gate.
2. Verify that the select le ...
Installation
CLUTCH SYSTEM > Release Bearing and LeverINSTALLATIONNOTE:Apply the specified grease to lubricate to the following points before installation.• Contact surface of lever and pivot• Contact surface of lever and bearing• Transmission main shaft spline• Contact surface of rele ...
Removal
SECURITY AND LOCKS > Body Integrated UnitREMOVALCAUTION:Before handling the airbag system components, refer to “CAUTION” of “General Description” in “AIRBAG SYSTEM”. General Description > CAUTION">1. Disconnect the ground cable from battery and wait ...
