Subaru Crosstrek manuals

Subaru Crosstrek Owners Manual: Remote keyless entry system

Subaru Crosstrek Owners Manual / Keys and doors / Remote keyless entry system

CAUTION

For models with "keyless access with push-button start system", the access key is used as the transmitter for the remote keyless entry system. For models without "keyless access with push-button start system", the transmitter for the remote keyless entry system is located inside the key head.

The remote keyless entry system has the following functions.

The operable distance of the remote keyless entry system is approximately 30 feet (10 meters). However, this distance will vary depending on environmental conditions. The system's operable distance will be shorter in areas near a facility or electronic equipment emitting strong radio waves such as a power plant, broadcast station, TV tower, or remote controller of home electronic appliances.

NOTE

Access key

Access key

  1. Lock/arm button
  2. Unlock/disarm button
  3. Rear gate unlock button
  4. PANIC button

Transmitter

Transmitter

  1. Lock/arm button
  2. Unlock/disarm button
  3. Rear gate unlock button
  4. PANIC button

NOTE

The hazard warning flashers will flash once or twice when the access key/ transmitter button is pressed in the following cases.

Operation of the hazard warning flashers in the above cases can be set to "On" or "Off" by a SUBARU dealer.

Consult your SUBARU dealer for details. Also, for models with a multi function display, the setting can be changed using the display. For details, refer to "Hazard warning flasher setting" 3-78.

Unlocking
Perform steps 1 to 5 described in "Registration". NOTE You cannot unlock by PIN Code Access in the following cases. when the access key is within the operating ranges when the ignition swit ...

Locking the doors
Press the lock/arm button to lock all doors and rear gate. An electronic chirp will sound once and the hazard warning flashers will flash once. If any of the doors (or the rear gate) is not ful ...

Other materials:

Installation
CONTINUOUSLY VARIABLE TRANSMISSION(TR580) > Oil Pump ChainINSTALLATION1. Clean the mating surface of oil pump chain cover and converter case.2. Using the ST, install the oil seal.NOTE:• Use a new oil seal.• Apply CVTF to the oil seal lip and press-fitting surface.ST 499755602PRESS ...

Clear memory mode Operation
ENGINE (DIAGNOSTICS)(H4DO) > Clear Memory ModeOPERATION1. SUBARU SELECT MONITORNOTE:• Initial diagnosis of electronic throttle control is performed after memory clearance. Wait for 10 seconds or more after turning the ignition switch to ON, and then start the engine.• For detailed ope ...

Dtc b1578 meter
IMMOBILIZER (DIAGNOSTICS) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)DTC B1578 METERDTC DETECTING CONDITION:• Except for C5 modelReference code incompatibility between combination meter and body integrated unit or communication failure between body integrated unit and ECM&bull ...

© 2016-2022 Copyright www.sucross.com