To use the hands-free system, it is necessary to register a Bluetooth phone with the system.
For details about registering a Bluetooth device: Refer to "Registering a Bluetooth Audio device for the first time"
1. Turn the Bluetooth connection setting of your cell phone on.
2. Press the HOME button and select the "SETTINGS" key.
3. Touch the tab and then the "SETTINGS" screen will appear.
Settings (When the tab is selected)
4. To register a device, touch the "Set" key on "BT Devices Connection".
"BT Devices Connection" screen (At the initial startup and when no device is
registered).
5. Touch the "Add" key.
When the "Add" key is selected (Waiting for the connection request from a
device).
6. Register the Bluetooth device using your Bluetooth device.
7. Check that the screen is displayed when registration is complete.
Unlocking the doors
Press the unlock/disarm button to unlock
the driver's door. An electronic chirp will
sound twice and the hazard warning
flashers will flash twice. To unlock all
doors and the rear gate, briefly press the
unlock/disarm button a second time within
5 seconds.
NOTE
If the interval between the fi ...
Check list for interview Check
LAN SYSTEM (DIAGNOSTICS) > Check List for InterviewCHECKInspect the following item about the vehicle’s state.1. DISPLAY STATUS IN THE COMBINATION METERDisplay status in the combination meterEngine coolant temperature gauge display OK / NGFuel gauge display OK / NGTachometer display OK / ...
Dtc p0717 input/turbine shaft speed sensor "a" circuit no signal
CONTINUOUSLY VARIABLE TRANSMISSION (DIAGNOSTICS) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)DTC P0717 INPUT/TURBINE SHAFT SPEED SENSOR "A" CIRCUIT NO SIGNALDTC detecting condition:Immediately at fault recognitionTrouble symptom:• Standing start problems• Shock ...