Subaru Crosstrek Service Manual: Rear disc rotor

Installation

BRAKE > Rear Disc Brake AssemblyINSTALLATIONNOTE:Before installation, remove mud and foreign matter from the caliper body assembly and support - rear disc brake.1. Before installation, check each p ...

Inspection

BRAKE > Rear Disc RotorINSPECTION1. DISC ROTOR RUNOUT CHECK1. Check the hub unit COMPL - rear axle for free play and runout before the inspection of disc rotor runout limit. Rear Hub Unit Bearing ...

Other materials:

Preparation for maintenance settings
1. Turn the ignition switch to the "ON" position. 2. Push and hold the  button to show the selection screen. 3. After the selection screen is displayed, operate the "  " or " " switch to show the "Maintenance" item. Then, push the button. ...

Installation
CONTINUOUSLY VARIABLE TRANSMISSION(TR580) > CVTF FilterINSTALLATIONNOTE:For installation of CVTF filter, refer to “Transmission Case”. Transmission Case > ASSEMBLY"> Transmission Case > INSTALLATION"> ...

Installation
SECURITY AND LOCKS > Impact SensorINSTALLATION1. Pull out the key from the ignition switch, or turn the ignition switch to OFF.2. Close all the doors and rear gate.3. Press the UNLOCK button of the keyless transmitter or access key.4. Disconnect the ground cable from battery. NOTE">5. In ...