Subaru Crosstrek Service Manual: Rear axle

Installation

DRIVE SHAFT SYSTEM > Propeller ShaftINSTALLATION1. Before installation, check the following items, and replace the propeller shaft assembly as necessary.• Dents or cracks on the tube surface& ...

Assembly

DRIVE SHAFT SYSTEM > Rear AxleASSEMBLY1. BUSHING - REAR AXLE HOUSINGDo not remove the bushing - rear axle housing from the rear axle housing, because it cannot be replaced. If removed, replace the ...

Other materials:

Installation
CONTINUOUSLY VARIABLE TRANSMISSION(TR580) > Transfer Driven GearINSTALLATION1. Install the transfer driven gear assembly.2. Install the transfer clutch assembly. Transfer Clutch > INSTALLATION">3. Select the transfer driven gear shim. Transfer Clutch > ADJUSTMENT">4. Insta ...

Secondary pressure (line pressure) test Inspection
CONTINUOUSLY VARIABLE TRANSMISSION(TR580) > Secondary Pressure (Line Pressure) TestINSPECTIONCAUTION:• Directly after the vehicle has been running or the engine has been idling for a long time, the CVTF is hot. Be careful not to burn yourself.• Make sure no other person is around the ...

Open/close
To open: First unlock the rear gate lock then push the rear gate opener button. To close: Lower the rear gate slowly and push down firmly until the latch engages. The rear gate can be lowered easily if you pull it down holding the recessed grip. WARNING To prevent dangerous exhaust ...