Subaru Crosstrek Service Manual: Read diagnostic trouble code (dtc) Operation
TIRE PRESSURE MONITORING SYSTEM (DIAGNOSTICS) > Read Diagnostic Trouble Code (DTC)
OPERATION
1. On «Start» display, select «Diagnosis».
2. On «Vehicle selection» display, input the target vehicle information and select «Confirmed».
3. On «Main Menu» display, select «Each System».
4. On «Select System» display, select «Tire Pressure Monitor» and then select «Enter».
5. On «Select Function» display, select «DTC».
NOTE:
• For detailed operation procedures, refer to “Application help”.
• For details concerning DTCs, refer to List of Diagnostic Trouble Code (DTC). List of Diagnostic Trouble Code (DTC)">
• All DTCs detected will be displayed.
• If a particular DTC is not properly stored in memory (due to a voltage drop of the TPMS & keyless entry CM or TPMS CM power supply, etc.) when a problem occurs, a DTC suffixed with a question mark appears on the Subaru Select Monitor display. This shows it may be an unreliable reading.
• When DTC is not displayed, check the indicator circuit and communication circuit. Tire Pressure Warning Light / Trouble Indicator Light Illumination Pattern">
List of diagnostic trouble code (dtc) List
TIRE PRESSURE MONITORING SYSTEM (DIAGNOSTICS) > List of Diagnostic Trouble Code (DTC)LISTDTCItemContents of diagnosisRemarksC2021TIRE 1 AIR PRESSURE LOW (NORMAL MODE)Tire pressure of tire 1 is redu ...
Register transmitter (id) Operation
TIRE PRESSURE MONITORING SYSTEM (DIAGNOSTICS) > Register Transmitter (ID)OPERATIONPerform the registration procedure of the transmitter in the following cases:• Transmitter is replaced.• ...
Other materials:
Preparation tool
TELEMATICS SYSTEM (DIAGNOSTICS) > General DescriptionPREPARATION TOOL1. SPECIAL TOOLILLUSTRATIONTOOL NUMBERDESCRIPTIONREMARKS — SUBARU SELECT MONITOR 4Used for setting of each function and troubleshooting for electrical system.NOTE:For detailed operation procedures of Subaru Select Monitor 4, r ...
Inspection
MANUAL TRANSMISSION AND DIFFERENTIAL(5MT) > Transmission Mounting SystemINSPECTIONCheck the following; repair or replace the faulty parts.1. PITCHING STOPPERCheck the pitching stopper for bends or damage. Check that the rubber is not stiff, cracked or otherwise damaged.2. CROSSMEMBER AND CUSHION ...
Driving tips for AWD models
WARNING
Always maintain a safe driving
speed according to the road and
weather conditions in order to
avoid having an accident on a
sharp turn, during sudden braking
or under other similar conditions.
Always use the utmost care in
driving - overconfidence because
you are driving ...
