Subaru Crosstrek manuals

Subaru Crosstrek Service Manual: Read diagnostic trouble code (dtc) Operation

Subaru Crosstrek Service Manual / Occupant detection system (diagnostics) / Read diagnostic trouble code (dtc) Operation

OCCUPANT DETECTION SYSTEM (DIAGNOSTICS) > Read Diagnostic Trouble Code (DTC)

OPERATION

Read out DTCs stored in the airbag system and the occupant detection system.

1. AIRBAG SYSTEM

1. On «Start» display, select «Diagnosis».

2. On «Vehicle selection» display, input the target vehicle information and select «Confirmed».

3. On «Main Menu» display, select «Each System».

4. On «Select System» display, select «Airbag» and select «Enter».

5. On «Airbag» display, select «DTC».

NOTE:

For detailed operation procedures, refer to “Application help”.

For details concerning DTC, refer to List of Diagnostic Trouble Code (DTC) in AIRBAG SYSTEM. List of Diagnostic Trouble Code (DTC)">

2. OCCUPANT DETECTION SYSTEM

1. On «Start» display, select «Diagnosis».

2. On «Vehicle selection» display, input the target vehicle information and select «Confirmed».

3. On «Main Menu» display, select «Each System».

4. On «Select System» display, select «Occupant Detection» and then select «Enter».

5. On «Occupant Detection» display, select «DTC».

NOTE:

For detailed operation procedures, refer to “Application help”.

For details concerning DTC, refer to “List of Diagnostic Trouble Code (DTC)”. List of Diagnostic Trouble Code (DTC)">

Read current data Operation
OCCUPANT DETECTION SYSTEM (DIAGNOSTICS) > Read Current DataOPERATIONCheck the operating condition of each sensor in the event of malfunction in the seat belt buckle switch, or when the seat belt bu ...

Parking brake
...

Other materials:

Hill start assist system
WARNING The Hill start assist system is a device only for helping the driver to START the vehicle on an uphill grade. To prevent accidents when the vehicle is parked on a slope, be sure to firmly set the parking brake. When setting the parking brake, make sure that the vehicle re ...

Installation
CONTROL SYSTEMS > MT Gear Shift LeverINSTALLATION1. Insert the gear shift lever from the room side.NOTE:Insert the rod and the stay, and then temporarily set them onto the transmission mount.2. Lift up the vehicle.3. Install the joint to the transmission and secure with a spring pin.(A)Joint(B)Sp ...

Inspection
ENTERTAINMENT > Audio SystemINSPECTION1. BASIC INSPECTIONModel with 6.2 inch display1. Using the Check List for Interview, ask the customer the condition of how the trouble occurred. Check List for Interview > CHECK">2. Check the battery. Battery > INSPECTION">3. Check the ...

© 2016-2024 Copyright www.sucross.com