EXTERIOR BODY PANELS > Protector Tape
INSTALLATION
Apply the protector tape by the following steps.
1. REAR QUARTER PROTECTOR (MODELS WITHOUT SIDE GARNISH)
(1) | Apply the protector tape by aligning it to the rounded edge. |
1. Clean the area around applying position to remove any foreign objects on body.
2. Detach the backing paper from the temporary retention area (a) and apply the protector tape after positioning it correctly.
3. Detach the backing papers, and moisten the applying area and the backside of protector tape by spraying liquid (mild detergent solution at 3% concentration).
4. Apply the protector tape to the vehicle body.
CAUTION:
Remove the water or air bubbles out of the protector tape by using the plastic or rubber spatula.
5. Detach the application tape and temporary retention tape.
6. Bend the tack-in end and apply it as shown by (1) in the figure.
Rear window wiper blade rubber
1. Pull out the end of the blade rubber
assembly to unlock it from the plastic
support.
2. Pull the blade rubber assembly out of
the plastic support.
1) Metal spines
3. If the new blade rubber is not provided
with two metal spines, remove the metal
spines from the old blade rubbe ...
Wheel replacement
When replacing wheels due, for example,
to damage, make sure the replacement
wheels match the specifications of the
wheels that are fitted as standard equipment.
Replacement wheels are available
from SUBARU dealers.
WARNING
Use only those wheels that are
specified for your vehicle. Wheels
...
Removal
SECURITY AND LOCKS > Steering Lock CMREMOVALCAUTION:• Before handling the airbag system components, refer to “CAUTION” of “General Description” in “AIRBAG SYSTEM”. General Description > CAUTION">• Do not allow harness and connectors to i ...