Subaru Crosstrek Service Manual: Preparation tool
AIRBAG SYSTEM > General Description
PREPARATION TOOL
1. SPECIAL TOOL
• TEST HARNESS N
ILLUSTRATION | TOOL NUMBER | DESCRIPTION | REMARKS |
98299SA000
TEST HARNESS N
Used for unit inspection of steering roll connector.
• TEST HARNESS Q
ILLUSTRATION | TOOL NUMBER | DESCRIPTION | REMARKS |
98299SA040
TEST HARNESS Q
Used for unit inspection of steering roll connector.
• TEST HARNESS ADAPTER D
ILLUSTRATION | TOOL NUMBER | DESCRIPTION | REMARKS |
98299SA010
TEST HARNESS ADAPTER D
• Used for operation process of knee airbag module.
• Used for operation process of curtain airbag module.
• Used together with AIRBAG DEPLOYMENT TOOL. (98299PA030)
• TEST HARNESS ADAPTER AM
ILLUSTRATION | TOOL NUMBER | DESCRIPTION | REMARKS |
98299FJ000
TEST HARNESS ADAPTER AM
• Used for operation process of passenger’s airbag module.
• Used together with AIRBAG DEPLOYMENT TOOL. (98299PA030)
• TEST HARNESS ADAPTER K
ILLUSTRATION | TOOL NUMBER | DESCRIPTION | REMARKS |
98299FG010
TEST HARNESS ADAPTER K
• Used for operation process of side airbag module.
• Used together with AIRBAG DEPLOYMENT TOOL. (98299PA030)
• AIRBAG DEPLOYMENT TOOL
ILLUSTRATION | TOOL NUMBER | DESCRIPTION | REMARKS |
98299PA030
AIRBAG DEPLOYMENT TOOL
• Used for operation process of airbag module.
• Used together with each test harness adapter.
2. GENERAL TOOL
TOOL NAME | REMARKS |
Steering wheel puller | Used for removing the steering wheel. |
TORX® T40 | Used for removing and installing the beam COMPL - steering. |
Circuit tester | Used for measuring resistance, voltage and current. |
Caution
AIRBAG SYSTEM > General DescriptionCAUTION1. BEFORE STARTING ALL WORKS• Before performing vehicle maintenance, turn the ignition switch to OFF and disconnect the negative terminal from batter ...
Component
AIRBAG SYSTEM > General DescriptionCOMPONENT(1)Front sub sensor RH(4)Airbag warning light (in combination meter)(7)Airbag control module(2)Front sub sensor LH(5)Airbag ON/OFF indicator light (MFD)( ...
Other materials:
Electrical component location Location
VEHICLE DYNAMICS CONTROL (VDC) (DIAGNOSTICS) > Electrical Component LocationLOCATION(1)VDC control module and hydraulic control unit (VDCCM&H/U)(7)VDC OFF indicator light(12)ABS wheel speed sensor(2)Connector(8)Steering angle sensor(13)Engine control module (ECM)(3)VDC OFF switch(9)Transmissi ...
Operation
POWER ASSISTED SYSTEM (POWER STEERING) (DIAGNOSTICS) > Subaru Select MonitorOPERATION1. HOW TO USE SUBARU SELECT MONITORFor detailed operation procedures, refer to “Application help”.2. READ CURRENT DATA1. On «Start» display, select «Diagnosis».2. On «Vehicle selection» display, ...
Dtc b28b2 stereo camera high temperature
EyeSight (DIAGNOSTICS) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)DTC B28B2 STEREO CAMERA HIGH TEMPERATUREDetected when the temperature of the stereo camera excessively increases.NOTE:When this DTC is detected, performing adjustment or inspection of the camera will not return to the ...
