Subaru Crosstrek Service Manual: Preparation tool
SEAT BELT SYSTEM > General Description
PREPARATION TOOL
1. SPECIAL TOOL
• SUBARU SELECT MONITOR
ILLUSTRATION | TOOL NUMBER | DESCRIPTION | REMARKS |
—
SUBARU SELECT MONITOR 4
Used for setting of each function and troubleshooting for electrical system.
NOTE:
For detailed operation procedures of Subaru Select Monitor 4, refer to “Application help”.
• TEST HARNESS AP
ILLUSTRATION | TOOL NUMBER | DESCRIPTION | REMARKS |
98299FJ030
TEST HARNESS AP
Used when measuring voltage and resistance of occupant detection system.
• TEST HARNESS AG
ILLUSTRATION | TOOL NUMBER | DESCRIPTION | REMARKS |
98299AG070
TEST HARNESS AG
Used when measuring voltage and resistance of airbag control module.
• TEST HARNESS Y
ILLUSTRATION | TOOL NUMBER | DESCRIPTION | REMARKS |
98299AG040
TEST HARNESS Y
Used for troubleshooting seat belt buckle switch.
• AIRBAG RESISTOR
ILLUSTRATION | TOOL NUMBER | DESCRIPTION | REMARKS |
98299PA040
AIRBAG RESISTOR
Used in replacement of airbag module for which resistance value is same as airbag module.
• TEST HARNESS ADAPTER D
ILLUSTRATION | TOOL NUMBER | DESCRIPTION | REMARKS |
98299SA010
TEST HARNESS ADAPTER D
• Used for operation process of pretensioner.
• Used together with AIRBAG DEPLOYMENT TOOL. (98299PA030)
• AIRBAG DEPLOYMENT TOOL
ILLUSTRATION | TOOL NUMBER | DESCRIPTION | REMARKS |
98299PA030
AIRBAG DEPLOYMENT TOOL
• Used for operation process of pretensioner.
• Used together with each test harness adapter.
2. GENERAL TOOL
TOOL NAME | REMARKS |
Circuit tester | Used for measuring resistance, voltage and current. |
DST-i | Used together with Subaru Select Monitor 4. |
Caution
SEAT BELT SYSTEM > General DescriptionCAUTIONFor details of the following precautions for seat belt pretensioner, refer to “AIRBAG SYSTEM” section. General Description > CAUTION&quo ...
Component
SEAT BELT SYSTEM > General DescriptionCOMPONENT1. FRONT SEAT BELT(1)Adjuster ASSY - seat belt(4)Seat belt inner - frontTightening torque: N·m (kgf-m, ft-lb)(2)Cover through(5)Wave washerT1:7 ...
Other materials:
Remote keyless entry system
CAUTION
Do not expose the remote transmitter
to severe shocks, such as
those experienced as a result of
dropping or throwing.
Do not take the remote transmitter
apart except when replacing
the battery
Do not get the remote transmitter
wet. If it gets wet, wipe it dry with
a clo ...
Installation
FUEL INJECTION (FUEL SYSTEMS)(H4DO) > Fuel TankINSTALLATION1. Support the fuel tank with a transmission jack, set the fuel tank in place, and temporarily tighten the bolts of the fuel tank band.WARNING:A helper is required to perform this work.2. Tighten the bolts of the fuel tank band in the ord ...
Assembly
MANUAL TRANSMISSION AND DIFFERENTIAL(5MT) > Transfer Case and Extension Case AssemblyASSEMBLY1. EXTENSION CASE1. Using the ST, install the oil seal to the extension case. Oil Seal">NOTE:Use a new oil seal.2. Install the dust cover.3. Install the shift bracket.Tightening torque:24.5 N&mid ...
