LUBRICATION(H4DO) > General Description
PREPARATION TOOL
1. SPECIAL TOOL
ILLUSTRATION | TOOL NUMBER | DESCRIPTION | REMARKS |
18332AA000
OIL FILTER WRENCH
Used for removing and installing oil filter (black). (Outer diameter: 68 mm (2.68 in))
—
SUBARU SELECT MONITOR 4
Used for setting of each function and troubleshooting for electrical system.
NOTE:
For detailed operation procedures of Subaru Select Monitor 4, refer to “Application help”.
2. GENERAL TOOL
TOOL NAME | REMARKS |
Oil filter wrench (65/67 mm 14 Flutes) | Used for removing and installing oil filter (blue). (Outer diameter: 67.4 mm (2.65 in)) |
Circuit tester | Used for measuring resistance, voltage and current. |
DST-i | Used together with Subaru Select Monitor 4. |
TORX® bit T45 | Used for removing and installing oil pan upper. |
Wiring diagram
WIPER AND WASHER SYSTEMS > Wiper and Washer SystemWIRING DIAGRAM1. WIPER AND WASHER (FRONT)Refer to “Front Wiper and Washer System” in the wiring diagram. Front Wiper and Washer System > WIRING DIAGRAM">2. WIPER AND WASHER (REAR)Refer to “Rear Wiper and Washer System ...
Receiving a call
Incoming calls
When a call is received, the incoming call
screen is displayed with a sound.
When you receive a phone call while the
cell phone is connected, the screen
changes to the incoming call screen.
Incoming call screen
Open the "Options" screen. Refer to
"Phone volume settin ...
Vdc off indicator light does not go off
VEHICLE DYNAMICS CONTROL (VDC) (DIAGNOSTICS) > Warning Light Illumination PatternVDC OFF INDICATOR LIGHT DOES NOT GO OFFDetecting condition:• Defective combination meter• Defective CAN communication• VDC OFF switch is shorted.Trouble symptom:VDC OFF indicator light does not go o ...