Subaru Crosstrek manuals

Subaru Crosstrek Owners Manual: Preparation for screen settings

1. Turn the ignition switch to the "ON" position.

2. Push and hold the button to show the selection screen.

Preparation for screen settings

3. After the selection screen is displayed, operate the "  " or " " switch to show the "Screen Setting" item. Then, push the button.

Screen settings
The items in screen settings can be set. To change the items, operate the "" or " " switch, and then push the button. ...

Top display setting
1. Perform the preparation steps according to "Preparation for screen settings" 2. Operate the " " or " " switch to select the "Top Display" item. Then push the button. 3. Push ...

Other materials:

Installation
CONTINUOUSLY VARIABLE TRANSMISSION(TR580) > Oil PumpINSTALLATION1. Install the O-ring.NOTE:• Use new O-rings.• Apply CVTF to the O-ring.2. Install the plate and the oil pump.NOTE:Apply CVTF to the bolt.Tightening torque:8.5 N·m (0.9 kgf-m, 6.3 ft-lb)3. Install the oil pump chai ...

Disassembly
MANUAL TRANSMISSION AND DIFFERENTIAL(5MT) > Transfer Driven GearDISASSEMBLY1. Using the ST, remove the taper roller bearing (extension case side).ST 498077000REMOVER(A)Taper roller bearing (extension case side)2. Using ST1 and ST2, remove the taper roller bearing (transfer case side).ST1 49 ...

Dtc c1741 pressure sensor
VEHICLE DYNAMICS CONTROL (VDC) (DIAGNOSTICS) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)DTC C1741 PRESSURE SENSORDTC detecting condition:Defective pressure sensorTrouble symptom:• ABS does not operate.• VDC does not operate.• Hill start assist does not operate.STEP ...

© 2016-2025 Copyright www.sucross.com