Subaru Crosstrek Service Manual: Precautions when working with the parts mounted on the vehicle
WIRING SYSTEM > Working Precautions
PRECAUTIONS WHEN WORKING WITH THE PARTS MOUNTED ON THE VEHICLE
1. When working under a vehicle which is jacked-up, always be sure to use rigid rack.
2. The parking brake must always be applied during working. Also, in automatic transmission vehicles, keep the select lever set to the P (Parking) range.
3. Be sure the workshop is properly ventilated when running the engine. Further, be careful not to touch the belt or fan while the engine is operating.
4. Be careful not to touch hot metal parts, especially the radiator and exhaust system immediately after the engine has been turned off.
Precautions in trouble diagnosis and repair of electric parts
WIRING SYSTEM > Working PrecautionsPRECAUTIONS IN TROUBLE DIAGNOSIS AND REPAIR OF ELECTRIC PARTS1. The battery cable must be disconnected from the battery’s (−) terminal, and the igniti ...
Other materials:
Location
LIGHTING SYSTEM > Relay and FuseLOCATIONMain fuse boxHeadlight relay (HI)(A)Headlight relay (LO)(B)Fuse 15 A (daytime running light relay)(C)Fuse 30 A (combination light LH/RH)(D)Fuse 20 A (spot map light, room light, ignition switch illumination (immobilizer antenna))(E)Fuse 15 A (tail and illum ...
Inspection
LIGHTING SYSTEM > Ignition Switch IlluminationINSPECTIONSTEPCHECKYESNO1.CHECK THE IGNITION SWITCH ILLUMINATION.Make sure the ignition switch illumination illuminates when driver’s side door is open.Does the ignition switch illumination illuminate?Ignition switch illumination is normal. Igni ...
Display settings
Touch the tab to set display.
Item
Function
Day/Night
Mode
The "Auto", "Day" or "Night" key
can be selected on the pop-up
screen.
When the "Auto" key is selected,
the screen changes to day or
night mode depending on the
position of the headlight swi ...
