Subaru Crosstrek manuals

Subaru Crosstrek Owners Manual: Power saving function

The keyless access function will be disabled in the following cases to protect the access key battery and the vehicle battery.

To recover the keyless access function: Operate one of the following items.

Case 2: When the access key has been left in the operating range for 10 minutes or longer while all doors are locked

To recover the keyless access function:

Operate one of the following items.

How to use keyless access functions
Keyless access function tips Turn off the push-button ignition switch before locking the doors (including rear gate) using the keyless access function. It is not possible to lock the doors ( ...

Door unlock selection function
The door unlock selection function makes the following operations possible. Unlocking the driver's door without unlocking any other doors (including the rear gate) when gripping the driver's ...

Other materials:

65
CRUISE CONTROL SYSTEM (DIAGNOSTICS) > Diagnostic Procedure with Cancel Code65Cruise control command switch malfunction is detected.While the command switch is pressed ON for a long time (approximately two minutes), stuck ON condition is detected.TROUBLE SYMPTOM:• Cruise control cannot be se ...

Inspection
MANUAL TRANSMISSION AND DIFFERENTIAL(5MT) > Drive Pinion Shaft AssemblyINSPECTIONDisassembled parts should be washed with cleaning solvent first, then inspected carefully.1. BearingReplace the bearings in the following cases.• When the bearing balls, outer races and inner races are broken o ...

Disassembly
CONTROL SYSTEMS > MT Gear Shift LeverDISASSEMBLY1. Remove the lock wires.(A)Lock wire2. Remove the rod from gear shift lever.(A)Rod(B)Lever(C)Stay3. Separate the rod and inner boot.4. Remove the snap ring from the stay.(A)Snap ring5. Separate the gear shift lever and the stay.6. Remove the boot a ...

© 2016-2022 Copyright www.sucross.com