Subaru Crosstrek Owners Manual: Phone volume settings
The call and ringtone volume can be adjusted. A ringtone can be selected.
1. Display the "PHONE" screen. Refer to "How to change the hands-free phone system" F5-73.
2. Touch the 
key.
3. Select the desired item to be set.
- On the "PHONE" screen, the screen
changes to the "Options" screen when you
select the
key.
Options (volume settings) screen
- Adjust the ringtone volume. The "−" key lowers the volume, and the "+" key increases the volume. (Default volume: 4 out of a total of 16 volume levels)
- Adjust the receive volume. The "−" key lowers the volume, and the "+" key increases the volume. (Default volume: 4 out of a total of 16 volume levels)
- Adjust the transmit volume. The "−" key lowers the volume, and the "+" key increases the volume. (Default volume: 3 out of a total of 5 volume levels)
NOTE
- Depending on the type of phone, certain functions may not be available.
- Contact data is managed independently
for every registered phone.
When one phone is connected, another phone's registered data cannot be read.
Phone settings
You can transfer the phonebook information
and adjust the volume of your phone
using the Bluetooth phone system.
NOTE
The ringer volume for outgoing and
incoming calls, as well as the volume
...
Update contacts from phone
Operation methods differ between PBAP
(Phone Book Access Profile) compatible
and PBAP incompatible but OPP (Object
Push Profile) compatible Bluetooth
phones.
1. Display the "PHONE" screen. Refe ...
Other materials:
Installation
INSTRUMENTATION/DRIVER INFO > Steering SwitchINSTALLATIONCAUTION:• Before handling the airbag system components, refer to “CAUTION” of “General Description” in “AIRBAG SYSTEM”. General Description > CAUTION">• Do not allow harness and co ...
Inspection
OCCUPANT DETECTION SYSTEM (DIAGNOSTICS) > Subaru Select MonitorINSPECTION1. COMMUNICATION FOR INITIALIZING THE AIRBAG SYSTEM IS IMPOSSIBLEDETECTING CONDITION:Defective harness connectorTROUBLE SYMPTOM:Communication is impossible between the airbag control module and the Subaru Select Monitor.NOTE ...
Installation
CONTINUOUSLY VARIABLE TRANSMISSION(TR580) > Primary Pulley and Secondary PulleyINSTALLATION1. Select shims for pulley alignment. Primary Pulley and Secondary Pulley > ADJUSTMENT">2. Install the seal ring to the input shaft.NOTE:• Use new seal rings.• When installing the se ...