Installation
InspectionInspection
BRAKE > Front Disc RotorINSPECTION1. DISC ROTOR RUNOUT CHECK1. Check the hub unit COMPL - front axle for free play and runout before the inspection of disc rotor runout limit. Front Hub Unit Bearing > INSPECTION">2. Tighten the wheel nuts to secure disc rotor.3. Set a dial gauge 10 mm ...
Inspection
FUEL INJECTION (FUEL SYSTEMS)(H4DO) > Fuel Pump RelayINSPECTION1. Check that the fuel pump relay has no deformation, cracks or other damages.2. Measure the resistance between fuel pump relay terminals.Terminal No.Standard1 and 21 M? or more3 and 493.8 — 136.4 ? (when 20°C (68� ...
Removal
DRIVE SHAFT SYSTEM > Front AxleREMOVAL1. Lift up the vehicle, and then remove the front wheels.2. Remove the axle nut.CAUTION:Do not loosen the axle nut while the front axle is loaded. Doing so may damage the hub unit bearing.(1) Lift the crimped section of axle nut.(2) Remove the axle nut using ...