Subaru Crosstrek Owners Manual: Outgoing screen
Outgoing call screen
- Open the "Options" screen. Refer to "Phone volume settings"
- Abort the call. The screen returns to the phone (menu) screen. This is the same as pressing the on hook switch on the steering wheel.
NOTE
- Depending on the type of Bluetooth phone being connected, it may be necessary to perform additional steps on the phone.
- When you are on the outgoing call screen, the screen changes to the call screen when the other party answers the call.
The 
,
, and 
keys are disabled
on the outgoing call screen.
By Dialpad
Input the phone number manually using
the keypad displayed on the screen.
Phone (Dialpad) screen
Allow you to enter numbers from 0 to
9 and *, #, and +. To enter "+", press
and hold the ...
Receiving a call
Incoming calls
When a call is received, the incoming call
screen is displayed with a sound.
When you receive a phone call while the
cell phone is connected, the screen
changes to the incoming c ...
Other materials:
Removal
STARTING/CHARGING SYSTEMS(H4DO) > GeneratorREMOVAL1. Remove the V-belt covers.2. Disconnect the ground cable from battery. NOTE">3. Remove the V-belts. V-belt > REMOVAL">4. Disconnect the connector (A) and terminal (B) from the generator, and remove the clip (C).5. Remove the ...
Installation
MECHANICAL(H4DO) > Rocker CoverINSTALLATION1. ROCKER COVER RH1. Install the #1 spark plug pipe gasket and #3 spark plug pipe gasket to the #1 spark plug pipe and #3 spark plug pipe.NOTE:• Use a new #1 spark plug pipe gasket and #3 spark plug pipe gasket.• Apply a light coat of engine ...
Caution
LIGHTING SYSTEM > General DescriptionCAUTION• Before disassembling or reassembling parts, always disconnect the battery ground cable from battery. When replacing the audio, control module and other parts provided with memory functions, record the memory contents before disconnecting the bat ...