Subaru Crosstrek Service Manual: Operation

1. On «Start» display, select «Diagnosis».

2. On «Vehicle selection» display, input the target vehicle information and select «Confirmed».

3. On «Main Menu» display, select «Each System».

4. On «Select System» display, select «Subaru Rear Vehicle Detection(RH)» or «Subaru Rear Vehicle Detection(LH)» and then select «Enter».

5. On «Select Function» display, select «Active Test».

NOTE:

For detailed operation procedures, refer to “Application help”.

List

Basic diagnostic procedure Procedure

Other materials:

Inspection
AUTO HEADLIGHT BEAM LEVELER SYSTEM (DIAGNOSTICS) > Subaru Select MonitorINSPECTION1. COMMUNICATION FOR INITIALIZING IMPOSSIBLECommunication error with auto headlight beam leveler CMDetecting condition:• Defective harness connector• Power supply circuit malfunction• Defective aut ...

Cooling and dehumidifying in high humidity and low temperature weather conditions
Under certain weather conditions (high relative humidity, low temperatures, etc.) a small amount of water vapor emission from the air outlets may be noticed. This condition is normal and does not indicate any problem with the air conditioning system. Air conditioner compressor shut-off when e ...

Information bar
Information bar Outside temperature indicator Top display Clock While the ignition switch is in the "ACC" or "ON" position, the outside temperature indicator, clock, etc. will be shown on the information bar. Outside temperature indicator This displays the outside temperature b ...