Subaru Crosstrek manuals

Subaru Crosstrek Service Manual: Operation

Blind Spot Detection/Rear Cross Traffic Alert (DIAGNOSTICS) > Read Current Data

OPERATION

1. On «Start» display, select «Diagnosis».

2. On «Vehicle selection» display, input the target vehicle information and select «Confirmed».

3. On «Main Menu» display, select «Each System».

4. On «Select System» display, select «Subaru Rear Vehicle Detection(RH)» or «Subaru Rear Vehicle Detection(LH)» and then select «Enter».

5. On «Select Function» display, select «Data Monitor».

NOTE:

For detailed operation procedures, refer to “Application help”.

List
Blind Spot Detection/Rear Cross Traffic Alert (DIAGNOSTICS) > Read Current DataLIST• «Subaru Rear Vehicle Detection (LH)»DisplayContentReference valueNoteSRVD System fail flagCurrent failur ...

Subaru select monitor
...

Other materials:

When starting the engine
To start the engine with remote engine start system, briefly press the lock button twice within 2 seconds, then press and hold the lock button for 3 seconds. 1. Press the lock button briefly. The hazard warning flashers then flash once and the keyless buzzer chirps once. 2. Within 2 secon ...

Dtc b1831 open in curtain airbag rh squib circuit
AIRBAG SYSTEM (DIAGNOSTICS) > Diagnostic Chart with Trouble CodeDTC B1831 OPEN IN CURTAIN AIRBAG RH SQUIB CIRCUITDiagnosis start condition:Ignition voltage is 10 V to 16 V.DTC detecting condition:• Curtain airbag harness (RH) circuit is open.• Curtain airbag module (RH) is faulty.&bul ...

Installation
SUNROOF/T-TOP/CONVERTIBLE TOP (SUNROOF) > Glass LidINSTALLATION1. GLASS LID1. Using a new TORX® bolt, install the lid assembly - sunroof.Tightening torque:4.5 N·m (0.46 kgf-m, 3.3 ft-lb)2. Perform the open/close operation checks for the glass lid.3. Check the height of the lid assembly - ...

© 2016-2024 Copyright www.sucross.com