AUTO HEADLIGHT BEAM LEVELER SYSTEM (DIAGNOSTICS) > Subaru Select Monitor
OPERATION
• For detailed operation procedures, refer to “Application help”.
• If the auto headlight beam leveler CM can not communicate with Subaru Select Monitor, perform “COMMUNICATION FOR INITIALIZING IMPOSSIBLE”. Subaru Select Monitor > INSPECTION">
Inspection
GLASS/WINDOWS/MIRRORS > Outer Mirror AssemblyINSPECTION1. CHECK OPERATION1. Disconnect the outer mirror connector.2. Apply battery voltage between the outer mirror connector terminals and check the mirror operation.Terminal No.Inspection conditionsSwitch position — — OFF3 (+) — 8 (−) ...
Dtc b16f8 satellite safing sensor recognition error
AIRBAG SYSTEM (DIAGNOSTICS) > Diagnostic Chart with Trouble CodeDTC B16F8 SATELLITE SAFING SENSOR RECOGNITION ERRORDiagnosis start condition:Ignition voltage is 10 V to 16 V.DTC detecting condition:• Satellite safing sensor is misinstalled.• Airbag control module is faulty.STEPCHECKYE ...
Installation
EXTERIOR/INTERIOR TRIM > Rear BumperINSTALLATIONInstall each part in the reverse order of removal.CAUTION:Before installing the bumper face, match the claws on the bracket - rear bumper with the engaging position of flange section on the bumper face side. If the engaging position is not correct, ...