Subaru Crosstrek manuals

Subaru Crosstrek Service Manual: Operation

AIRBAG SYSTEM (DIAGNOSTICS) > Read Current Data

OPERATION

Check the operating condition of each sensor in the event of malfunction in the seat belt buckle switch, or when the seat belt buckle switch has been replaced.

1. On «Start» display, select «Diagnosis».

2. On «Vehicle selection» display, input the target vehicle information and select «Confirmed».

3. On «Main Menu» display, select «Each System».

4. On «Select System» display, select «Airbag» and select «Enter».

5. On «Airbag» display, select «Data monitor».

NOTE:

For detailed operation procedures, refer to “Application help”.

List
AIRBAG SYSTEM (DIAGNOSTICS) > Read Current DataLISTItemDisplayNoteTrip Count — — Count — — Time Count [msec] — — Belt Buckle Switch RHUnbelted/Belted“Belted” when passeng ...

Subaru select monitor
...

Other materials:

Steering warning light does not come on
POWER ASSISTED SYSTEM (POWER STEERING) (DIAGNOSTICS) > STEERING Warning LightSTEERING WARNING LIGHT DOES NOT COME ON1. POWER STEERING ASSIST ENABLEDDetecting condition:• Defective combination meter• Defective harnessTrouble symptom:When the ignition switch is turned to ON (engine OFF) ...

Removal
DRIVE SHAFT SYSTEM > Front Hub Unit BearingREMOVAL1. Lift up the vehicle, and then remove the front wheels.2. Remove the axle nut.CAUTION:Do not loosen the axle nut while the front axle is loaded. Doing so may damage the hub unit bearing.(1) Lift the crimped section of axle nut.(2) Remove the axl ...

Dtc c2521 motor malfunction
POWER ASSISTED SYSTEM (POWER STEERING) (DIAGNOSTICS) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)DTC C2521 MOTOR MALFUNCTIONTrouble symptom:• The steering wheel operation feels heavy.• STEERING warning light illuminates.Wiring diagram:Electric power steering system Elect ...

© 2016-2025 Copyright www.sucross.com