INSTRUMENTATION/DRIVER INFO (DIAGNOSTICS) > User Customizing
OPERATION
1. COMBINATION METER
1. On «Start» display, select «Diagnosis».
2. On «Vehicle selection» display, input the target vehicle information and select «Confirmed».
3. On «Main Menu» display, select «Each System».
4. On «Select System» display, select «Combination Meter» and then select «Enter».
5. On «Select Function» display, select «Customize».
6. On «Customize» display, select an item to be customized.
NOTE:
• For detailed operation procedures, refer to “Application help”.
• If not equipped (depending on destination area or vehicle equipment condition), some items are not displayed.
Inspection
SECURITY AND LOCKS > Security SystemINSPECTION1. BASIC DIAGNOSTIC PROCEDURESTEPCHECKYESNO1.INITIAL CHECK.Check the keyless entry system or keyless access system operation.Does the keyless entry system or keyless access system operate normally? Security System > INSPECTION">Go to Step 2 ...
Wiring diagram
SECURITY AND LOCKS > Door Lock Control SystemWIRING DIAGRAMFor wiring diagrams related to the door lock control system, refer to the following items.• Keyless entry system: Keyless Entry System > WIRING DIAGRAM">• Keyless access system: Keyless Access System > WIRING D ...
Removal
FRONT SUSPENSION > Front Crossmember Support PlateREMOVAL1. Lift up the vehicle.2. Remove the under cover - front. Front Under Cover > REMOVAL">3. Remove the bolt, and remove the front crossmember support. ...