Subaru Crosstrek Service Manual: Operation
INSTRUMENTATION/DRIVER INFO (DIAGNOSTICS) > Subaru Select Monitor
OPERATION
• For detailed operation procedures, refer to “Application help”.
• If the combination meter or MFD can not communicate with Subaru Select Monitor, perform the “Communication for Initializing Impossible”. Subaru Select Monitor > INSPECTION">
If the DTCs related to the LAN system are not displayed, perform the inspection by connecting the Subaru Select Monitor to another vehicle which is operating properly and by establishing the communication.
Inspection
INSTRUMENTATION/DRIVER INFO (DIAGNOSTICS) > Subaru Select MonitorINSPECTION1. COMMUNICATION FOR INITIALIZING IMPOSSIBLE (COMBINATION METER)Detecting condition:• Defective harness connector&bu ...
Other materials:
Component
SEATS > General DescriptionCOMPONENT1. FRONT SEAT• Manual seat LH(1)Pad ASSY - front seat backrest(15)Cover - hinge front seat OUT(29)Pad ASSY - front seat cushion(2)Cover COMPL - front backrest(16)Lever - reclining(30)Heater unit - front seat backrest(3)Cover - silencer front seat backrest ...
Electrical specification
SECURITY AND LOCKS > Keyless Entry SystemELECTRICAL SPECIFICATION1. KEYLESS ENTRY CONTROL MODULE• Model without tire pressure monitoring systemTerminal No.ItemMeasuring conditionStandard3 (U-ART com.) — Cannot be measured — 4 (+B) ←> Chassis groundVoltageAlways10 — 14 V7 (GND) ...
Inspection
LUBRICATION(H4DO) > Engine OilINSPECTIONCAUTION:If the engine oil is spilt over exhaust pipe or the under cover, wipe it off with cloth to avoid emitting smoke or causing a fire.1. Park the vehicle on a level surface.2. Turn the ignition switch to OFF.3. Remove the oil level gauge and wipe away t ...
