Subaru Crosstrek Service Manual: Oil pan and strainer

Installation

CONTINUOUSLY VARIABLE TRANSMISSION(TR580) > Inhibitor SwitchINSTALLATION1. Install the inhibitor switch to the transmission case temporarily.2. Connect the inhibitor harness connector to the inhibi ...

Inspection

CONTINUOUSLY VARIABLE TRANSMISSION(TR580) > Oil Pan and StrainerINSPECTION• Check each part for damage or dust.• Check oil strainer for clogging. ...

Other materials:

Driving range on remaining fuel
U.S.-spec. models Except U.S.-spec. models The driving range indicates the distance that can be driven taking into account the amount of fuel remaining in the tank and the average rate of fuel consumption. When the low fuel warning light illuminates, the driving range display flas ...

Dtc u0423 invalid data received from instrument panel cluster control module
LAN SYSTEM (DIAGNOSTICS) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)DTC U0423 INVALID DATA RECEIVED FROM INSTRUMENT PANEL CLUSTER CONTROL MODULEDTC DETECTING CONDITION:Defective data was transmitted from combination meter.TROUBLE SYMPTOM:Display of combination meter does not operate ...

To increase the speed (by the "RES/ SET" switch)
Press the "RES/SET" switch to the "RES" side and hold it until the vehicle reaches the desired speed. Then, release the switch. The vehicle speed at that moment will be memorized and treated as the new set speed. U.S.-spec. models When the difference between the actual vehicle speed and ...