Subaru Crosstrek manuals

Subaru Crosstrek Owners Manual: Odometer

Type A

Type A

  1. Trip knob

Type B

Type B

  1. Trip knob (U.S.-spec. models)
  2. Trip knob (except U.S.-spec. models)

This meter displays the odometer when the ignition switch is in the "ON" position.

The odometer shows the total distance that the vehicle has been driven.

If you press the trip knob when the ignition switch is in the "LOCK"/"OFF" or "ACC" position, the odometer/trip meter will light up. If you do not press the trip knob within 10 seconds of illumination of the odometer/ trip meter, the odometer/trip meter will turn off.

Also, if you open and close the driver's door within 10 seconds of illumination of the odometer/trip meter, the odometer/trip meter will turn off.

Canceling the function for meter/gauge needle movement upon turning on the ignition switch
It is possible to activate or deactivate the movement of the meter needles and gauge needles that takes place when the ignition switch is turned to the "ON" position. Type A combination meter To ...

Double trip meter
Type A Trip knob Type B Trip knob (U.S.-spec. models) Trip knob (except U.S.-spec. models) This meter displays the two trip meters when the ignition switch is in the "ON" positio ...

Other materials:

Dtc c1352 normal opening valve 2
VEHICLE DYNAMICS CONTROL (VDC) (DIAGNOSTICS) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)DTC C1352 NORMAL OPENING VALVE 2NOTE:For the diagnostic procedure, refer to “DTC C1362 NORMAL CLOSING VALVE 2”. Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC C1362 ...

Inspection
HVAC SYSTEM (HEATER, VENTILATOR AND A/C) > Sunload Sensor (Auto A/C Model)INSPECTION1. Check if there is anything that affects sensing, around the sunload sensor.(1) Is the sunload sensor free from any object that disturbs sensing?(2) Is the windshield glass free from any object such as sticker o ...

Dtc b1905 short in front p/t lh
AIRBAG SYSTEM (DIAGNOSTICS) > Diagnostic Chart with Trouble CodeDTC B1905 SHORT IN FRONT P/T LHDiagnosis start condition:Ignition voltage is 10 V to 16 V.DTC detecting condition:• Seat belt pretensioner (LH) circuit is shorted.• Pretensioner (LH) is faulty.• Pretensioner harness ...

© 2016-2024 Copyright www.sucross.com