Subaru Crosstrek Service Manual: Note

For operation procedures of each component of the vehicle dynamics control system, refer to the respective section.

• VDC control module & hydraulic control unit (VDCCM&H/U): VDC Control Module and Hydraulic Control Unit (VDCCM&H/U)">

• Yaw rate & G sensor: Yaw Rate and G Sensor">

• Steering angle sensor: Steering Angle Sensor">

• Front ABS wheel speed sensor: Front ABS Wheel Speed Sensor">

• Rear ABS wheel speed sensor: Rear ABS Wheel Speed Sensor">

• Front magnetic encoder: Front Magnetic Encoder">

• Rear magnetic encoder: Rear Magnetic Encoder">

• VDC OFF switch: VDC OFF Switch">

Inspection

Yaw rate and g sensor

Other materials:

Installation
FRONT SUSPENSION > Front ArmINSTALLATION1. Before installation, inspect the following items and replace any faulty part with a new one.• Check the front arm assembly for damage or cracks, and replace if defective.• Visually check the bushing for abnormal cracks, fatigue or damage.&bul ...

Dtc p0198 engine oil temperature sensor "a" circuit high
ENGINE (DIAGNOSTICS)(H4DO) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)DTC P0198 ENGINE OIL TEMPERATURE SENSOR "A" CIRCUIT HIGHDTC detecting condition:Immediately at fault recognitionTrouble symptom:• Hard to start• Improper idling• Poor driving performanc ...

Dtc p0108 manifold absolute pressure/barometric pressure sensor circuit high
ENGINE (DIAGNOSTICS)(H4DO) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)DTC P0108 MANIFOLD ABSOLUTE PRESSURE/BAROMETRIC PRESSURE SENSOR CIRCUIT HIGHDTC detecting condition:Immediately at fault recognitionCAUTION:After servicing or replacing faulty parts, perform Clear Memory Mode Cle ...