SECURITY AND LOCKS > Body Integrated Unit
NOTE
1. REPLACE BODY INTEGRATED UNIT
1. Check and record the current setting. Registration Body Integrated Unit > OPERATION">
2. Prepare all immobilizer keys already registered. (Models without the keyless access with push button start)
3. Replace the body integrated unit with a new part.
4. Set the current settings as recorded. Registration Body Integrated Unit > OPERATION">
5. Register the immobilizer. (Models without the keyless access with push button start) For detailed operation procedure, refer to “Type B” described in “REGISTRATION MANUAL FOR IMMOBILIZER”.
Dtc p0019 crankshaft position - camshaft position correlation bank 2 sensor b
ENGINE (DIAGNOSTICS)(H4DO) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)DTC P0019 CRANKSHAFT POSITION - CAMSHAFT POSITION CORRELATION BANK 2 SENSOR BDTC detecting condition:Detected when two consecutive driving cycles with fault occur.Trouble symptom:• Engine stall• Improp ...
Seatbelt maintenance
To clean the seatbelts, use a mild soap
and lukewarm water. Never bleach or dye
the belts because this could seriously
affect their strength.
Inspect the seatbelts and attachments
including the webbing and all hardware
periodically for cracks, cuts, gashes,
tears, damage, loose bolts or wor ...
Assembly
CONTINUOUSLY VARIABLE TRANSMISSION(TR580) > Extension CaseASSEMBLY1. Press-fit the dust cover into extension case.2. Install the extension case oil seal to extension case. Differential Side Retainer Oil Seal > REPLACEMENT">3. Install all plugs.NOTE:• Use a new O-ring or a gasket ...