INSTRUMENTATION/DRIVER INFO > Multi-function Display (MFD) System
NOTE
For procedure of each component in the Multi-Function Display (MFD) system, refer to the respective section.
• Multi-function display: Multi-function Display (MFD) > REMOVAL">
• Multi-function display switch: Multi-function Display (MFD) > REMOVAL">
Engine oil setting
1. Perform the preparation steps according
to "Preparation for maintenance settings"
2. Operate the "
" or "
" switch to
select the "Engine Oil" item. Then push
the
button.
3. Select the setting location (month, day,
year or distance) by operating the "
" or ...
Removal
INTAKE (INDUCTION)(H4DO) > Air Cleaner CaseREMOVAL1. Disconnect the ground cable from battery. NOTE">2. Remove the air intake duct. Air Intake Duct > REMOVAL">3. Disconnect the connector (A) from the mass air flow and intake air temperature sensor, and remove the clip (B).4. ...
Removal
HVAC SYSTEM (HEATER, VENTILATOR AND A/C) > In-Vehicle Sensor (Auto A/C Model)REMOVALCAUTION:Be careful not to damage the sensors and interior trims when removing.1. Disconnect the battery ground cable and wait for at least 60 seconds before starting work. NOTE">2. Remove the cover assemb ...