HVAC SYSTEM (HEATER, VENTILATOR AND A/C) > Air Conditioning System
NOTE
For procedure of each component in the air conditioning system, refer to the respective section.
• Blower motor unit assembly: Blower Motor Unit Assembly">
• Blower motor: Blower Motor">
• Power transistor (auto A/C model): Power Transistor (Auto A/C Model)">
• Blower resistor (manual A/C model): Blower Resistor (Manual A/C Model)">
• Control panel: Control Panel">
• Compressor: Compressor">
• Condenser: Condenser">
• Heater and cooling unit: Heater and Cooling Unit">
• Evaporator: Evaporator">
• Expansion valve: Expansion Valve">
• Hose & pipe: Hose and Pipe">
• Ambient sensor: Ambient Sensor">
• Sunload sensor (auto A/C model): Sunload Sensor (Auto A/C Model)">
• In-vehicle sensor (auto A/C model): In-Vehicle Sensor (Auto A/C Model)">
• Evaporator sensor: Evaporator Sensor">
• Intake door actuator: FRESH/RECIRC Door Actuator">
• Mode door actuator: Mode Door Actuator">
• Air mix door actuator: Air Mix Door Actuator">
Electrical component location Location
EyeSight (DIAGNOSTICS) > Electrical Component LocationLOCATION(1)Stereo camera(5)EyeSight steering switch(9)Transmission control module (TCM)(2)VDC control module (VDCCM)(6)MFD (multi-function display)(10)Stop light and brake switch(3)Brake light relay(7)Body integrated unit(11)ECM(4)Combination ...
Preparation tool
DIFFERENTIALS > General DescriptionPREPARATION TOOL1. SPECIAL TOOLILLUSTRATIONTOOL NUMBERDESCRIPTIONREMARKS398477701HANDLE• Used for installing the rear bearing race.• Used for installing the front bearing race.398477702DRIFT• Used for installing the front bearing race. (T-type) ...
Inspection
BRAKE > Brake PedalINSPECTION1. Move the pad - brake pedal in a horizontal direction with a force of approx. 10 N (1 kgf, 2 lbf), and check that the pedal deflection is in the range of specifications.CAUTION:If excessive deflection is noted, replace with a new bushing.Deflection of brake pedal:We ...