EyeSight > EyeSight System
NOTE
For procedure of each component in the EyeSight system, refer to the respective section.
• Control module: Control Unit">
NOTE:
System control of the EyeSight is performed by each module. For procedure, refer to the following sections.
– Engine control module (ECM): Engine Control Module (ECM)">
– Transmission control module (TCM): Transmission Control Module (TCM)">
– VDC control module & hydraulic control unit (VDCCM&H/U): VDC Control Module and Hydraulic Control Unit (VDCCM&H/U)">
– Stereo camera: Stereo Camera">
– Body integrated unit: Body Integrated Unit">
• Combination meter: Combination Meter">
• Stop light and brake switch: Stop Light Switch">
• Multi-function display (MFD): Multi-function Display (MFD)">
• Switches and harness: Switches and Harness">
• Roll connector (steering angle sensor): Roll Connector">
Inspection
HVAC SYSTEM (AUTO A/C) (DIAGNOSTICS) > Diagnostics with PhenomenonINSPECTION(1) Perform the diagnosis according to the diagnostic procedure of the corresponding symptom that is shown in the symptom list.(2) If there are multiple symptoms, perform the diagnosis in the symptom sequence (1 > 2 &g ...
Dtc b2a0a red led circuit
TELEMATICS SYSTEM (DIAGNOSTICS) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)DTC B2A0A RED LED CIRCUITDiagnosis start condition:When ACC is ON.DTC detecting condition:• Current in LED is less than 1 mA. (Improper LED connection, etc.)• Current is more than 200 mA for at le ...
Maintenance schedule
U.S. models
The scheduled maintenance items required
to be serviced at regular intervals
are shown in the "Warranty and Maintenance
Booklet". For details, read the
separate "Warranty and Maintenance
Booklet".
Canada models
The scheduled maintenance items required
to be serviced at regular i ...