Subaru Crosstrek Owners Manual: Monitor (if equipped)
To clean the audio/navigation/multi function display monitor, wipe it with a silicone cloth or with a soft cloth. If the monitor is extremely dirty, clean it with a soft cloth moistened with neutral detergent then carefully wipe off any remaining detergent.
CAUTION
- Do not spray neutral detergent directly onto the monitor. Doing so could damage the monitor's components.
- Do not wipe the monitor with a hard cloth. Doing so could scratch the monitor.
- Do not use cleaning fluid that contains thinner, fuel, or any other volatile substance. Such cleaning fluid could erase the lettering on the switches at the bottom of the monitor.
Climate control panel, audio panel, instrument panel, console panel, and
switches
Use a soft, damp cloth to clean the climate
control panel, audio equipment, instrument
panel, center console, combination
meter panel, and switches.
CAUTION
Do not use organic solvents such
...
Other materials:
Removal
EXTERIOR/INTERIOR TRIM > Front BumperREMOVAL1. Disconnect the ground cable from battery. NOTE">2. Remove the bumper face - front.(1) Remove the screw and clips, and turn over the mud guard - front.(2) Disconnect the connectors of the left and right fog light assembly - front. (Model with ...
Disassembly
MECHANICAL(H4DO) > Chain CoverDISASSEMBLY1. Remove the oil filler cap.2. Remove the engine oil filter and the oil pump union. Engine Oil Filter > REMOVAL">3. Remove the oil pressure switch. Oil Pressure Switch > REMOVAL">4. Remove the engine oil temperature sensor. Engine ...
System operation
The alarm system will sound the following
alarms when triggered.
The vehicle's horn will sound for 30
seconds.
The hazard warning flashers will flash
for 30 seconds.
If any of the doors or the rear gate remains
open after the 30-second period, the horn
will continue to sound for a ma ...