Subaru Crosstrek Owners Manual: Models without multi function display

Subaru Crosstrek Owners Manual / Instruments and controls / Multi function display (if equipped) / Models without multi function display

NOTE

For models with information display (black and white), refer to "Information display"

The U.S.-spec models are not equipped with the multi function display. The other models may be equipped with the multi function display or not, depending on the model.

Safety precautions

WARNING

Always pay adequate attention to safe driving when operating the multi function display while the vehicle is in motion. When operation of the multi function display is disturbing your awareness and ability to concentrate on driving, stop the vehicle in a safe place before performing operations on the screen. Also, do not concentrate on the display while driving. Doing so may cause you to look away from the road and could result in an accident.

Multi function display (if equipped)

...

Features

The multi function display has the following functions. Description Displays useful messages, such as warning information, etc. Displays basic screens (e.g. fuel consumption screen, etc.) Sets ...

Other materials:

New vehicle break-in driving - the first 1,000 miles (1,600 km)
The long-term durability, efficiency, and overall performance of your Subaru Ascent depend greatly on how carefully the vehicle is treated during its initial driving period. Proper break-in practices help ensure that key engine and drivetrain components settle correctly and operate at their be ...

Dtc u1120 lost communication with autostart stop control module
KEYLESS ACCESS WITH PUSH BUTTON START SYSTEM (DIAGNOSTICS) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)DTC U1120 LOST COMMUNICATION WITH AUTOSTART STOP CONTROL MODULEDetected when CAN data from hybrid system or Auto Start Stop CM is abnormal.NOTE:Perform the diagnosis for LAN system. ...

Installation
MECHANICAL(H4DO) > Cylinder HeadINSTALLATION1. CYLINDER HEAD RH1. Clean the bolt holes in the cylinder block RH.CAUTION:To avoid erroneous tightening of the bolts, clean out the bolt holes sufficiently by blowing with compressed air to eliminate engine coolant etc.2. Apply liquid gasket to both s ...