Subaru Crosstrek Owners Manual: Models with "keyless access with push-button start system"
NOTE
For more details, refer to the Owner's Manual supplement for the remote engine start system.
Access key
- Lock button
An access key can be used as the remote engine start transmitter. Operate the lock button to start or stop the engine as follows.
Before starting the engine
Before using the remote engine start system to start the engine, confirm the following conditions.
- The select lever is in the "P" position.
- All doors including the rear gate are closed.
- The engine hood is closed.
- The push-button ignition switch is in the "OFF" position.
Remote engine start system (dealer
option)
WARNING
There are some general precautions
when starting the engine.
Carefully read the precautions
described in "General precautions
when starting/stopping engine"
F7-9.
Do not remote ...
When starting the engine
To start the engine with remote engine
start system, briefly press the lock button
twice within 2 seconds, then press and
hold the lock button for 3 seconds.
1. Press the lock button briefly. Th ...
Other materials:
List of diagnostic trouble code (dtc) List
AUTO HEADLIGHT BEAM LEVELER SYSTEM (DIAGNOSTICS) > List of Diagnostic Trouble Code (DTC)LISTDTCItemContent of diagnosisReferenceU0073CONTROL MODULE COMMUNICATION BUS OFFDetected when CAN line abnormality is detected. Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC U0073 CONTROL M ...
Disassembly
SECURITY AND LOCKS > Ignition Key LockDISASSEMBLY1. Remove the immobilizer antenna assembly or the ignition switch illumination. Immobilizer Antenna > REMOVAL">2. Release the claws, and pull the key warning switch downwards to remove.3. Remove the screws and remove the key lock soleno ...
Dtc u0327 software incompatibility with vehicle security control module
INSTRUMENTATION/DRIVER INFO (DIAGNOSTICS) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)DTC U0327 SOFTWARE INCOMPATIBILITY WITH VEHICLE SECURITY CONTROL MODULEDetected when CAN data is not received from keyless access CM.NOTE:Perform the diagnosis for LAN system. Basic Diagnostic Proc ...
