Subaru Crosstrek Service Manual: Mode door actuator

Subaru Crosstrek Service Manual / Hvac system (heater, ventilator and a/c) / Mode door actuator

Installation

HVAC SYSTEM (HEATER, VENTILATOR AND A/C) > In-Vehicle Sensor (Auto A/C Model)INSTALLATIONInstall each part in the reverse order of removal. ...

HVAC SYSTEM (HEATER, VENTILATOR AND A/C) > Mode Door ActuatorINSPECTION1. CHECK LINK1. Visually check the operation range of the link, and remove the foreign material if any.2. Operate the air flow ...

Other materials:

Installation
CLUTCH SYSTEM > Clutch Pipe and HoseINSTALLATIONInstall in the reverse order of removal.NOTE:Bleed air from brake fluid. Clutch Fluid Air Bleeding">Tightening torque:T1: 15 N·m (1.5 kgf-m, 11.1 ft-lb)T2: 18 N·m (1.8 kgf-m, 13.3 ft-lb)T3: 25 N·m (2.5 kgf-m, 18.4 ft-lb ...

Inspection
LIGHTING SYSTEM > Interior Light SystemINSPECTION1. CHECK DOOR SWITCHRefer to the “INSPECTION” of the “Door Switch”. Door Switch > INSPECTION">2. CHECK REAR GATE LATCH SWITCHRefer to “INSPECTION” of the “Rear Gate Latch and Actuator Assembly&r ...

Activating and deactivating the alarm system
To change the setting of your vehicle's alarm system for activation or deactivation, do the following. 1. Disarm the alarm system. Refer to "Disarming the system" 2-30. 2. Sit in the driver's seat and shut all doors and the rear gate. 3. Turn the ignition switch to the "ON" position. ...