Pull the " /SET" switch to enter the menu screens when all of the following conditions are satisfied.
The menu list is as follows.
First menu | Second menu |
Screen Settings | Welcome Good-bye Screen |
Gauge Initial Movement | |
Languages | |
Go Back | |
EyeSight (models with EyeSight system) | Warning Volume |
Lead Vehicle Acquisition Sound | |
Lead Vehicle Moving Monitor Function | |
Go Back | |
BSD/RCTA (if equipped) | Warning Volume |
Default Settings | ― |
By operating the " " or " " switch on the steering wheel, you can select the menu.
Pull the " /SET" switch to enter the selected menu.
NOTE
If you enter the "Go Back" menu, the system will return to the previous screen.
Removal
SECURITY AND LOCKS > Rear Inner RemoteREMOVAL1. Disconnect the ground cable from battery. NOTE">2. Remove the trim panel - rear door. Door Trim > REMOVAL">3. Remove the screw, and remove the remote assembly - door. ...
Dtc c0026 rear right abs sensor signal
VEHICLE DYNAMICS CONTROL (VDC) (DIAGNOSTICS) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)DTC C0026 REAR RIGHT ABS SENSOR SIGNALNOTE:For the diagnostic procedure, refer to “DTC C0028 REAR LEFT ABS SENSOR SIGNAL”. Diagnostic Procedure with Diagnostic Trouble Code (DTC) > ...
Dtc p050b cold start ignition timing performance
ENGINE (DIAGNOSTICS)(H4DO) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)DTC P050B COLD START IGNITION TIMING PERFORMANCENOTE:For the diagnostic procedure, refer to DTC P050A. Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC P050A COLD START IDLE CONTROL SYSTEM PERFORM ...