Subaru Crosstrek Owners Manual: Locking and unlocking with "keyless access" entry function

Radio waves used for the keyless access with push-button start system

The keyless access with push-button start system uses radio waves of 134 kHz, in addition to the radio waves used for the remote keyless entry system. The radio waves are periodically output from ...

Operating ranges

Antenna Operating range The operating range of the door locking/ unlocking function is approximately 16 to 32 in (40 to 80 cm) from the respective door handle. The operating ran ...

Other materials:

Stopping engine
Stop the vehicle completely. Move the select lever to the "P" position. Press the push-button ignition switch. The engine will stop, and the power will be switched off. WARNING Do not touch the push-button ignition switch during driving. When the push-button ignition switch is ...

Dtc b1409 scu communication
IMMOBILIZER (DIAGNOSTICS) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)DTC B1409 SCU COMMUNICATIONDTC detecting condition:Communication failure between body integrated unit and security control moduleCAUTION:When the body integrated unit is replaced, registration of the immobilizer sy ...

Dtc p0030 a/f / o2 heater control circuit bank 1 sensor 1
ENGINE (DIAGNOSTICS)(H4DO) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)DTC P0030 A/F / O2 HEATER CONTROL CIRCUIT BANK 1 SENSOR 1DTC detecting condition:Detected when two consecutive driving cycles with fault occur.CAUTION:After servicing or replacing faulty parts, perform Clear Memor ...