Subaru Crosstrek Service Manual: Location
VEHICLE DYNAMICS CONTROL (VDC) > Relay and Fuse
LOCATION
Main fuse box | Fuse 50A (VDC CM&H/U) | (A) |
Fuse 30A (VDC CM&H/U) | (B) |
NOTE:
For other related fuses, refer to the wiring diagram. Power Supply Circuit">
Inspection
VEHICLE DYNAMICS CONTROL (VDC) > Relay and FuseINSPECTION1. CHECK FUSE1. Remove the fuse and inspect visually.2. If the fuse is blown out, replace the fuse. ...
Other materials:
To hook the top tether
CAUTION
Except for the center seating
position, remove the head restraint
when mounting a child
restraint system. Otherwise, it
might be possible that the top
tether cannot be fastened tightly.
For the center seating position,
raise the center head restraint to
the extended posit ...
Dtc p0717 input/turbine shaft speed sensor "a" circuit no signal
CONTINUOUSLY VARIABLE TRANSMISSION (DIAGNOSTICS) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)DTC P0717 INPUT/TURBINE SHAFT SPEED SENSOR "A" CIRCUIT NO SIGNALDTC detecting condition:Immediately at fault recognitionTrouble symptom:• Standing start problems• Shock ...
Inspection
GLASS/WINDOWS/MIRRORS > Rear Window Defogger SystemINSPECTION1. CHECK SYSTEMSymptomsInspection orderRear window defogger does not operate.(1) Check the fuse.(2) Check the rear defogger relay.(3) Check the rear window defogger switch.(4) Check the heat wire.(5) Check the wiring harness.(6) Check b ...
