Subaru Crosstrek Service Manual: Location
SECURITY AND LOCKS > Relay and Fuse
LOCATION
Main fuse box | Fuse 15 A (key warning switch, turn signal & hazard unit, body integrated unit) | (A) |
Fuse 20 A (body integrated unit, immobilizer antenna) | (B) | |
Relay & fuse box | Fuse 15 A (body integrated unit) | (C) |
Fuse 10 A (keyless access CM, TPMS & keyless entry CM) | (D) | |
Fuse 10 A (TPMS & keyless entry CM) | (E) |
NOTE:
For other related fuses, refer to the wiring diagram. Power Supply Circuit">
Inspection
SECURITY AND LOCKS > Relay and FuseINSPECTION1. CHECK FUSE1. Remove the fuse and inspect visually.2. If the fuse is blown out, replace the fuse.NOTE:If the fuse is blown again, check the system wir ...
Remote openers
...
Other materials:
Gasoline for cleaner air
Your use of gasoline with detergent
additives will help prevent deposits from
forming in your engine and fuel system.
This helps keep your engine in tune and
your emission control system working
properly, and is a way of doing your part
for cleaner air. If you continuously use a
high qualit ...
Airbag warning light illumination pattern Inspection
OCCUPANT DETECTION SYSTEM (DIAGNOSTICS) > Airbag Warning Light Illumination PatternINSPECTIONTurn the ignition switch to ON, and confirm that the airbag warning light remains on for approx. 6 seconds then turns off afterwards.(1)Airbag warning light(2)Approx. 6 seconds(3)Ignition switch ON ...
List of diagnostic trouble code (dtc) List
KEYLESS ACCESS WITH PUSH BUTTON START SYSTEM (DIAGNOSTICS) > List of Diagnostic Trouble Code (DTC)LIST(1) Keyless access systemDTCItemContent of diagnosisNoteU0073CONTROL MODULE COMMUNICATION BUS OFFDetected when CAN line abnormality is detected. Diagnostic Procedure with Diagnostic Trouble Code ...
