Subaru Crosstrek Service Manual: Location
CONTROL SYSTEMS > AT Shift Lock Control System
LOCATION
1. MODEL WITHOUT PUSH BUTTON IGNITION SWITCH
(1) | TCM (“P” range) | (4) | Key cylinder (with built-in key warning switch) | (6) | “P” range switch |
(2) | Body integrated unit | (5) | Solenoid unit | (7) | Key lock solenoid |
(3) | Stop light and brake switch |
2. MODEL WITH PUSH BUTTON IGNITION SWITCH
(1) | TCM (“P” range) | (3) | Stop light and brake switch | (5) | Solenoid unit |
(2) | Body integrated unit | (4) | Push button ignition switch | (6) | “P” range switch |
Inspection
CONTROL SYSTEMS > AT Shift Lock Control SystemINSPECTION1. SHIFT LOCK OPERATION• Model without push button ignition switchSTEPCHECKYESNO1.CHECK COMMUNICATION OF SUBARU SELECT MONITOR.1) Turn ...
Wiring diagram
CONTROL SYSTEMS > AT Shift Lock Control SystemWIRING DIAGRAM1. MODEL WITHOUT PUSH BUTTON IGNITION SWITCH(1)Ignition switch(5)TCM (shift range information)(9)Battery(2)Stop light and brake switch(6) ...
Other materials:
Dtc p0391 camshaft position sensor "b" circuit range/performance bank 2
ENGINE (DIAGNOSTICS)(H4DO) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)DTC P0391 CAMSHAFT POSITION SENSOR "B" CIRCUIT RANGE/PERFORMANCE BANK 2NOTE:For the diagnostic procedure, refer to DTC P0390. Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC P0390 CAMSH ...
Caution
SECURITY AND LOCKS > General DescriptionCAUTION• Before disassembling or reassembling parts, always disconnect the battery ground cable from battery. When replacing the audio, control module and other parts provided with memory functions, record the memory contents before disconnecting the ...
Welcome lighting function (if
equipped)
The welcome lighting function turns on the
low beam headlight for smooth approaching
to or exiting from the vehicle at night or
in a dark place.
The function is activated while all of the
following conditions are met.
The light control switch is in the
"AUTO" position
It is dark enoug ...