Subaru Crosstrek Service Manual: List
Blind Spot Detection/Rear Cross Traffic Alert (DIAGNOSTICS) > Read Current Data
LIST
• «Subaru Rear Vehicle Detection (LH)»
Display | Content | Reference value | Note |
SRVD System fail flag | Current failure status of BSD/RCTA system is displayed. |
• Normal
• Fail
—
SRVD System HALT flag
Current temporary stop status of BSD/RCTA system is displayed.
Temporary stop: Temporarily stops when reception of radar sensor waves failed due to some obstacles or when the temperature is not within the range of −40°C (−40°F) — 85°C (185°F).
• Normal
• Halt
—
SRVD System ON-OFF flag
ON/OFF status of BSD/RCTA system is displayed. If this flag is set to «OFF» while the values of «SRVD System fail flag» and «SRVD System HALT flag» are «Normal», the BSD/RCTA system is set to OFF by the BSD/RCTA OFF switch.
• OFF
• ON
—
LH-Side Target detection flag
Detection status of the control target vehicle on the rear left side is displayed.
Detection is possible if the target vehicle is moving when the own vehicle drives forward at 12 km/h (8 MPH) or more or backward at 0 km/h (0 MPH) or more.
• Un-detect
• Detect
—
LH-Side BSD caution 1st flag
ON is displayed when the 1st stage BSD warning on the left side is activated (when the outer mirror assembly illuminates).
• OFF
• ON
—
LH-Side LCA caution 1st flag
ON is displayed when the 1st stage LCA warning on the left side is activated (when the outer mirror assembly illuminates).
• OFF
• ON
—
LH-Side RCTA caution flag
ON is displayed when the RCTA warning on the left side is activated (when the outer mirror assembly illuminates and buzzer sounds).
• OFF
• ON
—
LH-Side Radar Voltage value
Power supply voltage of the radar sensor LH is displayed.
0 — 25.5 V
—
LH-Side Temperature value
Ambient temperature of the radar sensor LH is displayed.
−128 — 127°C
—
Ignition SW ON Count
Time stamp information General Description > CAUTION">
—
—
Count
—
—
Time Count
—
—
• «Subaru Rear Vehicle Detection (RH)»
Display | Content | Reference value | Note |
SRVD System fail flag | Current failure status of BSD/RCTA system is displayed. |
• Normal
• Fail
—
SRVD System HALT flag
Current temporary stop status of BSD/RCTA system is displayed.
Temporary stop: Temporarily stops when reception of radar sensor waves failed due to some obstacles or when the temperature is not within the range of −40°C (−40°F) — 85°C (185°F).
• Normal
• Halt
—
SRVD System ON-OFF flag
ON/OFF status of BSD/RCTA system is displayed. If this flag is set to «OFF» while the values of «SRVD System fail flag» and «SRVD System HALT flag» are «Normal», the BSD/RCTA system is set to OFF by the BSD/RCTA OFF switch.
• OFF
• ON
—
RH-Side Target detection flag
Detection status of the control target vehicle on the rear right side is displayed.
Detection is possible if the target vehicle is moving when the own vehicle drives forward at 12 km/h (8 MPH) or more or backward at 0 km/h (0 MPH) or more.
• Un-detect
• Detect
—
RH-Side BSD caution 1st flag
ON is displayed when the 1st stage BSD warning on the right side is activated (outer mirror assembly illuminates).
• OFF
• ON
—
RH-Side LCA caution 1st flag
ON is displayed when the 1st stage LCA warning on the right side is activated (outer mirror assembly illuminates).
• OFF
• ON
—
RH-Side RCTA caution flag
ON is displayed when the RCTA warning on the right side is activated (when the outer mirror assembly illuminates and buzzer sounds).
• OFF
• ON
—
RH-Side Radar Voltage value
Power supply voltage of the radar sensor RH is displayed.
0 — 25.5 V
—
RH-Side Temperature value
Ambient temperature of the radar sensor RH is displayed.
−128 — 127°C
—
Ignition SW ON Count
Time stamp information General Description > CAUTION">
—
—
Count
—
—
Time Count
—
—
Operation
Blind Spot Detection/Rear Cross Traffic Alert (DIAGNOSTICS) > Read Current DataOPERATION1. On «Start» display, select «Diagnosis».2. On «Vehicle selection» display, input the target vehicle i ...
Other materials:
Procedure
SECURITY AND LOCKS > Function Setting (Customize)PROCEDURE1. METHOD FOR STOPPING KEYLESS ACCESS SYSTEM FUNCTION BY OPENING/CLOSING DOORS1. Check that the vehicle status is as follows:• Ignition switch OFF• One window is completely open• Keyless access system is activated (or dis ...
Caution
TIRE PRESSURE MONITORING SYSTEM (DIAGNOSTICS) > General DescriptionCAUTION1. SUPPLEMENTAL RESTRAINT SYSTEM “AIRBAG”Airbag system wiring harness is routed near the TPM control module.CAUTION:• Do not use electrical test equipment on any of the airbag system wiring harness circuit ...
Assembly
MECHANICAL(H4DO) > Cylinder HeadASSEMBLY(1)Exhaust valve(6)Valve spring(11)Intake valve guide(2)Intake valve(7)Valve spring retainer(12)Exhaust valve guide(3)Cylinder head(8)Valve collet(13)Roller rocker arm pivot(4)Valve spring seat(9)Valve shim(14)Roller rocker arm(5)Intake valve oil seal(10)Ex ...
