EyeSight (DIAGNOSTICS) > Freeze Frame Data Display
LIST
• List of freeze frame data
Display | Content | Unit |
ECU Power Supply Voltage (IG) | Display of input voltage of stereo camera | V |
Engine Speed | Engine speed | rpm |
Accel opening angle | Acceleration opening angle signal | % |
Brake Fluid Target Pressure | Target value of brake fluid pressure | MPa |
Master Cylinder Actual Fluid Pressure | Brake pressure | MPa |
Right Front Wheel W/C Actual Fluid Pressure | Right front wheel cylinder fluid pressure | MPa |
Left Front Wheel W/C Actual Fluid Pressure | Left front wheel cylinder fluid pressure | MPa |
Brake SW Input | Brake switch signal status | — |
Brake Lamp SW (BIU) | Brake light switch signal status | — |
Brake Lamp SW (VDC) | Brake light switch status | — |
Trip Count | Timestamp information_Trip counter | times |
Count | Timestamp information_original count identification information | — |
Time Count | Timestamp information_time counter | ms |
Drive Wheel Average Speed | Average wheel speed signal | km/h |
Brake Lamp Command | Brake lamp light up command signal | — |
Driver Brake Detection | Driver brake detection signal | — |
Brake Control Actuation | Brake operation permission signal | — |
Pre-Collision Brake Assist Command | Pre-collision brake assist command signal | — |
Pre-Collision Brake Action | Pre-collision brake command signal | — |
Adaptive Cruise Control Torque Down | Torque down prohibition signal of stereo camera | — |
Engine Failure | Engine failure signal | — |
Brake Lamp SW Fail Status | Brake light switch failure signal | — |
Dtc p1493 coil 1 egr "a" control circuit high
ENGINE (DIAGNOSTICS)(H4DO) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)DTC P1493 COIL 1 EGR "A" CONTROL CIRCUIT HIGHNOTE:For the diagnostic procedure, refer to DTC P1499. Diagnostic Procedure with Diagnostic Trouble Code (DTC) > DTC P1499 COIL 4 EGR "A" CONTRO ...
Shift lock function
The shift lock function helps prevent the
improper operation of the select lever.
The select lever cannot be operated
unless the ignition switch is turned to the
"ON" position and the brake pedal is
depressed.
The select lever cannot be moved from
the "P" position to any other positio ...
Operation
CONTINUOUSLY VARIABLE TRANSMISSION (DIAGNOSTICS) > AWD Warning Light DisplayOPERATIONAWD light illuminates or blinks, when the AWD is in special control condition and AWD has malfunction.• At normal conditionAfter turning the ignition switch to ON, illuminates for 2 seconds then goes off.&b ...