1. Perform the preparation steps according to "Preparation for screen settings"
2. Operate the " " or " " switch to select the "Languages" item. Then push the button.
3. The current language setting will be displayed. Push the button to enter the language selection mode.
4. Select the preferred language by operating the " " or " " switch. Then push the button.
5. Select "Set" by operating the " " switch and confirm the setting by pushing the button.
6. The system will notify you that the setting is complete.
Selecting a channel from the list
1. The categories list is displayed via
either of the following procedures.
When you touch the
tab in the
SiriusXM main screen (if the list that
was displayed the last time is Categories).
When you select the tab in
each
list screen.
2. Each channel list is displayed whe ...
Assembly
MANUAL TRANSMISSION AND DIFFERENTIAL(5MT) > Transfer Driven GearASSEMBLY1. Using the ST, install the taper roller bearing (transfer case side).CAUTION:Do not apply a load in excess of 10 kN (1 ton, 1.1 US ton, 1.0 Imp ton).NOTE:Be careful when handling, because the outer race and inner race of th ...
Removal
ENTERTAINMENT > Rear SpeakerREMOVAL1. Disconnect the ground cable from battery. NOTE">2. Remove the trim panel - rear door. Door Trim > REMOVAL">3. Remove the rear speaker assembly.(1) Remove the screws.(2) Disconnect the connector behind the speaker and remove the rear speak ...