1. Perform the preparation steps according to "Preparation for car settings"
2. Operate the " " or " " switch to select the "Interior Light" item. Then push the button.
3. The current setting will be displayed.
Push the button to enter the selection mode.
4. Select the preferred setting by operating the " " or " " switch. Then push the button.
5. Select "Set" by operating the " " switch, and confirm the setting by pushing the button.
6. The system will notify you that the setting is complete.
If the setting is not available, the following notification will be displayed. In this case, perform the setting procedure again.
Dtc b278d id code box judgment circuit
KEYLESS ACCESS WITH PUSH BUTTON START SYSTEM (DIAGNOSTICS) > Diagnostic Procedure with Diagnostic Trouble Code (DTC)DTC B278D ID CODE BOX JUDGMENT CIRCUITDTC detecting condition:• When ID code box setting is set to OFF, ID code box ON input is detected.• When ID code box setting is se ...
Inspection
SUNROOF/T-TOP/CONVERTIBLE TOP (SUNROOF) > Sunroof Control SystemINSPECTIONSymptomsInspection stepsWater leakage(1) Check the roof panel and the lid assembly - sunroof for improper or poor sealing.(2) Check the drain tube - sunroof for clogging.(3) Check the joints of the rail assembly - sunroof f ...
Date and time settings
The items in the date and time settings
can be set. To change the items, operate
the "
" or "
" switch.
NOTE
The "Time/Date" item must be set to
display the "Birthday", "Anniversary"
and notifications for vehicle maintenance.
The "Birthday" and "Anniversary"
items can be entered ...