AIRBAG SYSTEM > Roll Connector
INSTALLATION
CAUTION:
If the steering wheel and steering angle sensor (steering roll connector) are removed, be sure to perform the following operations.
• Align the center position of the steering roll connector.
• Perform the neutral position setting of the steering angle sensor.
1. Before attaching a new roll connector, apply a thin coat of grease contained in the connector onto the areas shown by the arrows.
2. Install each part in the reverse order of removal.
3. Align the center position of the steering roll connector. Roll Connector > ADJUSTMENT">
4. Install the steering wheel. Steering Wheel > INSTALLATION">
5. Install the driver’s airbag module. Driver’s Airbag Module > INSTALLATION">
6. Connect the battery ground terminal. NOTE">
7. Perform the neutral position setting of the steering angle sensor. VDC Control Module and Hydraulic Control Unit (VDCCM&H/U) > ADJUSTMENT">
Vehicle Dynamics Control warning
light
CAUTION
The Vehicle Dynamics Control system
provides its ABS control
through the electrical circuit of the
ABS. Accordingly, if the ABS is
inoperative, the Vehicle Dynamics
Control system becomes unable to
provide ABS control. As a result, the
Vehicle Dynamics Control system
also becomes ...
Disassembly
CONTINUOUSLY VARIABLE TRANSMISSION(TR580) > Extension CaseDISASSEMBLY1. Remove the dust cover from extension case.2. Remove the extension case oil seal from the extension case. Differential Side Retainer Oil Seal > REPLACEMENT">3. Remove all plugs. ...
Engine noise Inspection
MECHANICAL(H4DO) > Engine NoiseINSPECTIONType of soundConditionPossible causeRegular clicking soundSound increases as engine speed increases.• Valve mechanism is defective• Incorrect cam clearance• Worn camshaft• Broken valve spring• Defective valve shimHeavy and dul ...